The 3 stages lubricated pistons “H” series compressors range is an unique NGV modular, compact, reliable, solution.

MAIN FEATURES: 

• Suction pressure: 0,3 ÷ 6 Bar

• Discharge pressure: 350 bar

• Installed power: 4 ÷ 15 KW

• N° cylinders / N° stages: 3 / 3

• Blow-down system

• Suction pressure reducing valve (optional)

• Three first stage piston size

• Air gas cooling system

• Driven by electric motor

• Two weatherproof sound insulted enclosure

• Compact unit with built on frame electrical cabinet and gas dispensing auxiliary devices with two hoses and filling nozzles

  “S” compressors are suitable for public filling stations and private fleet filling stations characterized by low daily gas sales and low suction pressures with minimum investment costs. These compressors are specifically designed for typical requirements of European filling stations, where the main market requirement is the availability of a network of filling stations geographically distributed on the territory.

MAIN FEATURES: 

• Suction pressure: 0,5 ÷ 8 bar

• Discharge pressure: 250 bar

• Installed power: 22 ÷ 90 KW

• N° cylinders / N° stages: 4 / 4

• Blow-down system

• Air water cooling system

• Driven by electric motor

• No gas leaks

• Minimized operating and maintenance cost

• Minimized vibrations

• Easy maintenance

 “ST” compressors are SAFE mid size units suitable for operation with high inlet pressures. These compressors are particularly suitable for filling stations with reduced investment costs and medium/high sales forecasts. “ST” compressor is available also in booster version driven by gas engine to be installed on the trailer for mobile stations.

MAIN FEATURES:

• Suction pressure: 8 ÷ 70 bar (max 250 bar in booster version)

• Discharge pressure: 250 bar

• Installed power: 22 ÷ 90 KW

• N° cylinders / N° stages: 3, 4, 5 / 2, 3, 4

• Valve lifter system

• Air water cooling system

• Driven by electric motor (gas engine in booster version)

• High flow rate

• Cost efficient solution

• Simple and compact station layout

• Minimized operating and maintenance cost

• Minimized vibrations

 “SV” compressor compared to the bigger “SW” series, has a body equipped with two cylinders. This allows to obtain reduce costs and easy maintenance.

“SV” compressor suitable for operation with high inlet pressures.

MAIN FEATURES: 

• Suction pressure: 8 ÷ 60 bar

• Discharge pressure: 250 bar

• Installed power: 75 ÷ 315 KW

• N° cylinders / N° stages: 2 / 2, 3

• Body cylinders: double effect (DE)

• Blow-down system

• Air water cooling system

• Driven by electric motor or gas engine

• Cost efficient solution

• Minimized vibrations

• Easy maintenance

 “SWSE” compressor compared to the bigger “SW” series, has a body equipped with single effect cylinders (SE). This allows to obtain reduce costs and easy maintenance.

“SWSE” compressor suitable for operation with low inlet pressures.

MAIN FEATURES:

• Suction pressure: 1 ÷ 8 bar

• Discharge pressure: 250 bar

• Installed power: 75 ÷ 200 KW

• N° cylinders / N° stages: 3 / 4

• Body cylinders: single effect (SE)

• Blow-down system

• Air water cooling system

• Driven by electric motor or gas engine

• Cost efficient solution

• Minimized vibrations

• Easy maintenance

 “SV” compressor compared to the bigger “SW” series, has a body equipped with two cylinders. This allows to obtain reduce costs and easy maintenance.

“SV” compressor suitable for operation with high inlet pressures.

MAIN FEATURES:

• Suction pressure: 8 ÷ 60 bar

• Discharge pressure: 250 bar

• Installed power: 75 ÷ 315 KW

• N° cylinders / N° stages: 2 / 2, 3

• Body cylinders: double effect (DE)

• Blow-down system

• Air water cooling system

• Driven by electric motor or gas engine

• Cost efficient solution

• Minimized vibrations

The “B” series compressor, thanks to hydraulic pumping elements, is suitable to work with a very wide range of suction pressure without pressure regulation valve. Therefore it is particularly indicated for trailer unloading at daughter stations (booster). Thanks to a compact design it is suitable to be installed on the trailer thus getting a mobile station.

MAIN FEATURES:

• Suction pressure: 20 ÷ 250 bar

• Discharge pressure: 300 bar

• Installed power: 15 ÷ 75 KW

• N° cylinders / N° stages: 2 / 2

• Absence of oil consumption

• Negligible scheduled maintenance requirements

• Air water cooling system

• Driven by electric motor or gas engine for mobile station

• High reliability

• Absence vibrations

• Very easy maintenance